| Structural robustness and timber buildings–a review JAJ Huber, M Ekevad, UA Girhammar, S Berg Wood Material Science & Engineering 14 (2), 107-128, 2019 | 94 | 2019 |
| Simulation of ‘smart’pole vaulting M Ekevad, B Lundberg Journal of Biomechanics 28 (9), 1079-1090, 1995 | 64 | 1995 |
| Influence of pole length and stiffness on the energy conversion in pole-vaulting M Ekevad, B Lundberg Journal of Biomechanics 30 (3), 259-264, 1997 | 52 | 1997 |
| The effects of cutting parameters and tool geometry on cutting forces and tool wear in milling high-density fiberboard with ceramic cutting tools Z Zhu, X Guo, M Ekevad, P Cao, B Na, N Zhu The International Journal of Advanced Manufacturing Technology 91, 4033-4041, 2017 | 43 | 2017 |
| Method to compute fiber directions in wood from computed tomography images M Ekevad Journal of Wood Science 50, 41-46, 2004 | 43 | 2004 |
| Main cutting force models for two species of tropical wood L Cristóvão, O Broman, A Grönlund, M Ekevad, R Sitoe Wood Material Science & Engineering 7 (3), 143-149, 2012 | 40 | 2012 |
| The cutting performance of Al2O3 and Si3N4 ceramic cutting tools in the milling plywood X Guo, Z Zhu, M Ekevad, X Bao, P Cao Advances in Applied Ceramics 117 (1), 16-22, 2018 | 35 | 2018 |
| Local water vapor diffusion coefficient when drying Norway spruce sapwood J Danvind, M Ekevad Journal of Wood Science 52, 195-201, 2006 | 35 | 2006 |
| Cutting forces and chip morphology during wood plastic composites orthogonal cutting X Guo, M Ekevad, B Marklund, R Li, P Cao, A Grönlund BioResources 9 (2), 2090-2106, 2014 | 31 | 2014 |
| Tool wear and machined surface roughness during wood flour/polyethylene composite peripheral upmilling using cemented tungsten carbide grades X Guo, M Ekevad, A Grönlund, B Marklund, P Cao Bioresources 9 (3), 3779-3791, 2014 | 31 | 2014 |
| Finite element analysis of alternative load paths in a platform-framed CLT building JAJ Huber, M Ekevad, UA Girhammar, S Berg Proceedings of the Institution of Civil Engineers-Structures and Buildings …, 2020 | 29 | 2020 |
| Industrial sawing of Pinus sylvestris L.: Power consumption L Cristóvão, M Ekevad, A Grönlund BioResources 8 (4), 6044-6053, 2013 | 29 | 2013 |
| Natural frequencies of roll-tensioned circular sawblades: Effects of roller loads, number of grooves and groove positions L Cristóvão, M Ekevad, A Grönlund BioResources 7 (2), 2209-2219, 2012 | 27 | 2012 |
| Tool wear for lesser known tropical wood species L Cristóvão, I Lhate, A Grönlund, M Ekevad, R Sitoe Wood Material Science & Engineering 6 (3), 155-161, 2011 | 25 | 2011 |
| A method for generating finite element models of wood boards from X-ray computed tomography scans JAJ Huber, O Broman, M Ekevad, J Oja, L Hansson Computers & structures 260, 106702, 2022 | 24 | 2022 |
| Effect of rake angle on cutting performance during machining of stone-plastic composite material with polycrystalline diamond cutters P Cao, Z Zhu, D Buck, X Guo, M Ekevad, XA Wang Journal of Mechanical Science and Technology 33, 351-356, 2019 | 22 | 2019 |
| Influence of pressing parameters on mechanical and physical properties of self-bonded laminated beech boards C Cristescu, D Sandberg, M Ekevad, O Karlsson Wood Material Science & Engineering 10 (2), 205-214, 2015 | 22 | 2015 |
| Effect of average chip thickness and cutting speed on cutting forces and surface roughness during peripheral up milling of wood flour/polyvinyl chloride composite X Guo, R Li, P Cao, M Ekevad, L Cristóvão, B Marklund, A Grönlund Wood Res 60 (1), 147-156, 2015 | 22 | 2015 |
| Investigation of glueline shear strength of pine wood bonded with PVAc by response surface methodology R Li, X Guo, M Ekevad, B Marklund, P Cao BioResources 10 (3), 3831-3838, 2015 | 20 | 2015 |
| Crack influence on load-bearing capacity of glued laminated timber using extended finite element modelling S Berg, D Sandberg, M Ekevad, M Vaziri Wood Material Science & Engineering 10 (4), 335-343, 2015 | 19 | 2015 |
Luís CristóvãoAssociate Professor, Eduardo Mondlane UniversityVerified email at ltu.se
